Privacy Policy

Privacy Policy

 

QC Styropackaging Corporation and Multiplast Corporation are committed to respecting and protecting your data privacy rights as a data subject in accordance with RA 10173 (“Data Privacy Law of 2012”), its Implementing Rules and Regulations, and other applicable laws.

Personal Information (PI), we process PI such as full names, company name, relevant dates including date of birth and contact details, for the following reasons:

-Process your transaction(s) whenever you avail of our services;

-Process your application when applying for a job;

-Address your inquiries, concerns, or complaints;

-Comply with laws and regulations

 

Data Sharing

We may also share your PI with:

-Our accredited third party personal information processors such as contractors, vendors, financial and legal consultants.

-Our affiliate companies (for commercial purposes, including direct marketing or profiling)

-Such data sharing shall be done in a manner compliant with the Data Privacy Act of 2012. Your PI may also be processed electronically and/or manually.

 

Disclosure of Personal Information

Your PI will not be disclosed without your express or implied consent. You may ask us to stop collecting, using and disclosing your PI at any time. Your PI may be disclosed if required by law, in the event of a corporate merger or acquisition, or if needed to be accessed as part of an investigation into technical problems or misuse.

 

Consent

You have the right to object or withhold consent to the processing of your PI. However, if you choose not to provide us with the required PI, we may be unable to provide you with the service requested or provide appropriate advice or service.

 

Security Measures

We employ a combination of organizational, contractual, physical, procedural and technical security measures to secure your PI that we process. Only authorized personnel shall have access to your PI.

 

Retention and Disposal of your Personal Information

We will retain your PI related to transactions for a minimum of ten (10) years to comply with applicable laws. On the other hand, PI collected from inquiries, complaints/concerns or during events will be retained for two (2) years. Access, Correction, Erasure and Blocking You have the right to request for a copy of your PI that we keep as well as request for the correction of any inaccurate data. You likewise have the right to suspend, withdraw or order the blocking, removal or destruction of your PI from our system.

 

Use of cookies

Cookies are small data files that we write into your device when you visit our website. We use cookies in order for you to have full functionality and excellent user experience in using our website. You may opt not to receive cookies by not accepting them or disabling them on your browser configuration. However, by doing this, you may not be able to fully utilize the features of our website. Our website may contain links to websites of third parties that may also use cookies. Should you use such links and leave our website, please note that we have no control over such third party sites.

 

Limitation on Rights

The foregoing rights with respect to your PI shall not apply to the processing of personal data gathered for the purpose of investigations in relation to any criminal, administrative or tax liabilities that you may have, provided that we will process the same only to the minimum extent necessary to achieve the purpose of said investigations.

 

Privacy Policy Changes and Updates

We reserve the right to amend this Privacy Policy at any time to comply with the latest laws and regulations or reflect changes in our business operations and environment. It is encouraged that you periodically review the Privacy Policy on our website for the latest information.

 

Contact us

For all your data privacy concerns, including complaints, please email admin@qcstyro.com

More about RA 10173

Please visit the website of the National Privacy Commission (https://privacy.gov.ph)

 

CHILLER TECHNICIAN - VALENZUELA

No. Of Vacancy: 1

Location : Lawang Bato, Valenzuela City

Qualifications:

  • Candidate must possess at least a Bachelor's/College Degree , Engineering (Mechatronic/Electromechanical) or equivalent.
  • At least 3 year(s) of working experience in the related field is required for this position.
  • Preferably 1-4 Yrs Experienced Employees specializing in Engineering - Mechanical/Automotive or equivalent.
  • Full-Time position(s) available.

Duties and Responsibilities:

  • Carries out all master level chiller operational maintenance and troubleshooting functions to include: HVAC systems, chilled water systems, split refrigeration,/Dx, VAV, FCU, PIU, fume hoods, exhaust fans, gas heaters, chillers, cooling towers, controls, air compressors, Freon, chemical treatments, ice machines and filters.
  • Prioritizes workload, sets deadlines, and schedules work assignments for HVAC staff.
  • Complete all operational maintenance, and troubleshooting functions of chillers and refrigeration systems (to include, but not limited to chillers, cooling towers, pumps, valves, controls, etc.) and associated support equipment.
  • Test and troubleshoot components of pneumatic and electronic control systems and natural gas and/or propane burner and supply system.

Please email: career_portal@qcstyro.com / hr12recruit@qcstyro.com
or call contact #: 0939-643-5370 / 0945-977-9477

 

 

CORP IE

No. Of Vacancy: 1

Location : Guyong, Sta Maria

Qualifications:

  • Bachelor's Degree preferably Industrial Engineering.
  • Industrial Engineering experience in manufacturing company.
  • Minimum two (2) to three (3) years of working experience.
  • Time and Motion knowledge, Analytical Thinking, Detail-Oriented, Knowledge in IE tools and techniques.

Duties and Responsibilities:

  • Develops and creates reports, checklist, new systems guidelines and operating procedures to have a systematic process flow for each department and Plants.
  • Work with Department Heads and ensure that products meet quality standards, reduce production problems and minimize costs.
    • Monitors and evaluates to achieve optimal results on efficiency and other key metrics (KPI).
  • Studies and analyze on how to improve poor performing processes, and studies pertaining to cost control and cost reduction.
  • Monitors project schedules and scope changes to meet the management requirements.
  • Monitoring of departmental performance, timeline and commitments related to strategic and tactical plans.
  • Maintains and analyze report for QC and MC Plants.(MRP Updating, DR Tagging and Approval).
  • Preparation of monthly reports and monitoring of weekly performance to ensure good operations performance.
  • Recommends corrective actions or solutions on problems encountered to eliminate idle and delays.
  • Coordinates analysis and recommendations to other department and Plant to provide a smooth and efficient operation.
  • Program Implementation
    • 6S Program Implementation
      • Creates checklist, guidelines, and manuals for program implementation.
      • Conducts audit cycle to measure the program development.
    • Process Review
      • Analyze critical processes and review with department heads to implement improvements.

Please email: career_portal@qcstyro.com / hr12recruit@qcstyro.com
or call contact #: 0939-643-5370 / 0945-977-9477

 

 

WELDER

No. Of Vacancy: 1

Location : Quezon City

Qualifications:

  • Graduate of Machine Shop related course.
  • At least 2 years work experience.
  • Able to weld/ join different types of metals.
  • Able to read working drawings.

Duties and Responsibilities:

  • Weld/ Build-up worn out machine/ mould parts using metal arc welding.
  • Mig welding and oxy acetylene welding.
  • Maintain machine in good working condition.

Please email: career_portal@qcstyro.com / hr12recruit@qcstyro.com
or call contact #: 0939-643-5370 / 0945-977-9477

 

 

AREA MANAGER – SOUTH GMA

No. Of Vacancy: 1

Location : South GMA

Qualifications:

  • Bachelor Degree Graduate of Business Administration, Retail Management or any Business related course.
  • Minimum five (5) to seven (7) years of proven working experience as area manager, store manager, assistant manager or similar managerial role.
  • Skilled in managing diverse operations from a distance.
  • Strategic mindset.
  • Excellent abilities in financial and operations planning.
  • Sound understanding of optimization of operations and standards for success.
  • Exceptional communication and interpersonal abilities.
  • Excellent organizational and leadership abilities- Strong business acumen with a strategic orientation.

Duties and Responsibilities:

  • Formulate fruitful business development strategies to ensure long-term success.
  • Set standards and objectives for different stores and departments.
  • Optimize and oversee operations to ensure efficiency.
  • Lead a team of store managers towards effective collaboration and attainment of goals.
  • Undertake sound financial management to ensure stores are profitable and stay within budget.
  • Ensure compliance with company’s policies and operational guidelines.
  • Deal with problems by providing creative and practical solutions.
  • Evaluate performance using key metrics and address issues to improve it.
  • Report to senior executives on progress and issues.

Please email: career_portal@qcstyro.com / hr12recruit@qcstyro.com
or call contact #: 0939-643-5370 / 0945-977-9477

 

 

AREA MANAGER - ISABELA

No. Of Vacancy: 1

Location : Isabela

Qualifications:

  • Bachelor Degree Graduate of Business Administration, Retail Management or any Business related course.
  • Minimum five (5) to seven (7) years of proven working experience as area manager, store manager, assistant manager or similar managerial role.
  • Skilled in managing diverse operations from a distance.
  • Strategic mindset.
  • Excellent abilities in financial and operations planning.
  • Sound understanding of optimization of operations and standards for success.
  • Exceptional communication and interpersonal abilities.
  • Excellent organizational and leadership abilities- Strong business acumen with a strategic orientation.

Duties and Responsibilities:

  • Formulate fruitful business development strategies to ensure long-term success.
  • Set standards and objectives for different stores and departments.
  • Optimize and oversee operations to ensure efficiency.
  • Lead a team of store managers towards effective collaboration and attainment of goals.
  • Undertake sound financial management to ensure stores are profitable and stay within budget.
  • Ensure compliance with company’s policies and operational guidelines.
  • Deal with problems by providing creative and practical solutions.
  • Evaluate performance using key metrics and address issues to improve it.
  • Report to senior executives on progress and issues.

Please email: career_portal@qcstyro.com / hr12recruit@qcstyro.com
or call contact #: 0939-643-5370 / 0945-977-9477

 

 

RM CUSTODIAN

No. Of Vacancy: 1

Location : Guyong Sta. Maria, Bulacan 

Qualifications:

  • Bachelor's Degree in any Business-related course.
  • Minimum of three (3) to five (5) years of working experience in Manufacturing Industry as Warehouseman or Inventory-related.
  • Accounting, analytical, oral and written, and supervisory skills.
  • Must be computer literate.
  • Knowledgeable in warehouse system.

Duties and Responsibilities:

  • Monitors and ensure availability of stocks for production usage.
  • Monitor and checks stock level status on a daily basis.
  • Ensure that all raw materials, factory supplies and other stocks at warehouse are in proper location and in good condition.
  • Prepares and submit required daily, weekly, and monthly report to PPIC Supervisor.
  • Secure the maintenance of all documentation and Quality Records of RM section.
  • Prepare P.R. Requisition on all material and packaging supplies within critical level.
  • Prepares and submit to PPIC Head a Weekly and Monthly Material Inventory and variance Report.
  • Responsible for the implementation and maintaining 6’ S of the Raw Material Section.

Please email: career_portal@qcstyro.com / hr12recruit@qcstyro.com
or call contact #: 0939-643-5370 / 0945-977-9477

 

 

CHILLER TECHNICIAN - GUYONG

No. Of Vacancy: 1

Location : Guyong Sta. Maria, Bulacan 

Qualifications:

  • Candidate must possess at least a Bachelor's/College Degree , Engineering (Mechatronic/Electromechanical) or equivalent.
  • At least 3 year(s) of working experience in the related field is required for this position.
  • Preferably 1-4 Yrs Experienced Employees specializing in Engineering - Mechanical/Automotive or equivalent.
  • Full-Time position(s) available.

Duties and Responsibilities:

  • Carries out all master level chiller operational maintenance and troubleshooting functions to include: HVAC systems, chilled water systems, split refrigeration,/Dx, VAV, FCU, PIU, fume hoods, exhaust fans, gas heaters, chillers, cooling towers, controls, air compressors, Freon, chemical treatments, ice machines and filters.
  • Prioritizes workload, sets deadlines, and schedules work assignments for HVAC staff.
  • Complete all operational maintenance, and troubleshooting functions of chillers and refrigeration systems (to include, but not limited to chillers, cooling towers, pumps, valves, controls, etc.) and associated support equipment.
  • Test and troubleshoot components of pneumatic and electronic control systems and natural gas and/or propane burner and supply system.

Please email: career_portal@qcstyro.com / hr12recruit@qcstyro.com
or call contact #: 0939-643-5370 / 0945-977-9477

 

 

AUXILIARY OPERATOR

No. Of Vacancy: 1

Location : Guyong Sta. Maria, Bulacan 

Qualifications:

  • Bachelor’s Degree Graduate of Mechanical, Electronics or equivalent.
  • Minimum one year of working experience in Boiler Operation.
  • Familiar to auxiliaries equipment including Compressor, Chiller, Vacuum and Cooling Tower.
  • Knowledgeable in Auxiliaries including Compressor, chiller, vacuum and cooling Tower.
  • Trouble shooting of Auxiliary requirements.
  • Analytical thinking for data and report.
  • With good oral and writing communication.

Duties and Responsibilities:

  • Perform minor repairs in-case of trouble of Auxiliary Equipment.
  • Analyze data gathered from auxiliary equipment and make report.
  • Collect, record, analyze and report the data from Auxiliary equipment.
  • Scope of Work included Compressor, Chiller, Vacuum, Meter A,B,C, Cooling Tower and Excel Air.
  • Housekeeping in-charge in auxiliary area.

Please email: career_portal@qcstyro.com / hr12recruit@qcstyro.com
or call contact #: 0939-643-5370 / 0945-977-9477

 

 

ENERGY FOREMAN

No. Of Vacancy: 1

Location : Guyong Sta. Maria, Bulacan 

Qualifications:

  • License in Mechanical Engineering or Electrical Engineering is required.
  • With at least 2 to 3 years’ experience in Boiler Operation.
  • Requires good oral and written communication.
  • With ability to analyze and prepare reports.
  • Knowledgeable in Boiler Operation and with good leadership.
  • Knowledgeable in Coal Fired Boiler preferably Chain Grate Boiler.

Duties and Responsibilities:

  • Assign, schedule and supervise operation of boilers in compliance of production and plant plan.
  • Relay instruction/guidance regarding safe work methods and techniques.
  • Collection of data and analyze for the following Boilers Operation Summary:
    • Safety compliance
    • Steam generation
    • Fuel consumption
    • Water consumption
    • Boilers parts and auxiliary status
    • Boilers water chemical
    • Target improvement
    • Environmental compliance
  • Supervise/Monitor of Boiler operation day to day activities
  • Responsible in making Preventive Maintenance schedule.
  • Liaison in ISO Compliance and Customer Audit.
  • Oversees repair jobs during Boiler breakdown.
  • Check/Inspect Boiler parts if in good condition at all times.
  • Monitoring of auxiliary equipment.
  • Responsible in manpower schedule and tasks.

Please email: career_portal@qcstyro.com / hr12recruit@qcstyro.com
or call contact #: 0939-643-5370 / 0945-977-9477

 

 

INSTRUMENTAL FOREMAN

No. Of Vacancy: 1

Location : Guyong Sta. Maria, Bulacan 

Qualifications:

  • Bachelor’s Degree Graduate of Engineering.
  • Minimum two (2) to three (3) years of working experience in Maintenance Operation.
  • Knowledge as a Control and Instrument Engineer.
  • Good oral and written communication skills.
  • Ability to analyze and prepare reports.
  • Knowledgeable in Preventive and Corrective maintenance of machines.
  • Good leadership skills.

Duties and Responsibilities:

  • Performs preventive and corrective maintenance of instrumentation equipment as per plan or otherwise necessary for the smooth functioning of the given area.
  • Apply the approved standards and best practices to ensure reliability and integrity of instruments and instrument systems.
  • Oversee maintenance activities carried out by technicians and provide technical support.
  • Responsible to all Instrumental works, monitoring of machine operation, responsible for the operation.
  • Checks inventory of spare parts of the machine.
  • Liaison in ISO Compliance and Customer Audit.
  • Responsible in Manpower Schedule and its task.

Please email: career_portal@qcstyro.com / hr12recruit@qcstyro.com
or call contact #: 0939-643-5370 / 0945-977-9477

 

 

STOCKROOM CUSTODIAN

No. Of Vacancy: 1

Location : Guyong Sta. Maria, Bulacan 

Qualifications:

  • Bachelor’s Degree Graduate.
  • Minimum one (1) to two (2) years of working experience.
  • Physically fit.
  • Manual dexterity is required for operating machinery.
  • Organized and punctual.
  • Basic knowledge of using and operating warehouse machinery and equipment.

Duties and Responsibilities:

  • Stock clerks typically type, file and keep accurate records to track materials.
  • Custodians perform preventive maintenance on forklift, truck, and/or railcar.
  • Communicate with workers from other shifts.
  • Clean and maintain work area.
  • Turn off and lock out equipment when not in use.
  • Move waste from assembly line to dumpsters.
  • Operate within standard operating procedures (SOPs) and job safety analysis.
  • Complete daily logs.
  • Package finished product for shipping (shrink wrapping, boxing, labeling).
  • Stage finished product for loading.
  • Load finished product onto truck, aircraft, and/or railcar.
  • Unload raw materials from truck, aircraft, and/or railcar.
  • Move raw materials to warehouse storage.

Please email: career_portal@qcstyro.com / hr12recruit@qcstyro.com
or call contact #: 0939-643-5370 / 0945-977-9477

 

 

PROCESS ENGINEER

No. Of Vacancy: 1

Location : Lawang, Bato

Qualifications:

  • Candidates must possess at least a Bachelor's Degree in Industrial Engineering.
  • With minimum three (3) to five (5) years of working experience in the manufacturing industry.
  • With technical skills and graduate of any engineering course.
  • Has commercial awareness, critical and logical thinking and excellent computer skills.

Duties and Responsibilities:

  • Conducts testing and measurement in terms of physical and functional properties of product item per process to ensure that all are within the approved product specification.
  • Facilitates sampling stage and testing of raw materials such as resin/ colorant, inks, packaging, etc. prior for mass utilization.
  • Prepares evaluation and recommendation for all testing's and inspections done.
  • Conducts incoming inspections and evaluation for positive/ negative- artwork, nylon, raw and packaging material.
  • Conducts rejection rate monitoring per process / section and develop innovative solutions.
  • Responsible for safety, orderliness and cleanliness in working area.
  • Responsible for coordination, monitoring, evaluation and reporting of new product sampling from internal and external customers.
  • Responsible for evaluating existing processes and configuring manufacturing systems to reduce cost, improve sustainability and develop best practices within the production process.

Please email: career_portal@qcstyro.com / hr12recruit@qcstyro.com
or call contact #: 0939-643-5370 / 0945-977-9477

 

 

PRODUCTION LEADMAN

No. Of Vacancy: 1

Location : Lawang, Bato

Qualifications:

  • Bachelor's Degree Graduate of Industrial Engineering or any related course.
  • Experience in the Manufacturing Industry.
  • Minimum of one (1) year working experience as Leadman / Leadlady in Manufacturing Industry.
  • Computer literate, good oral and written communication.
  • Leadership Skills.
  • With linear thinking, analytical, observational, and organizational skills.

Duties and Responsibilities:

  • Supervises and monitors activities on the production area in accordance with production schedule.
  • Inspects operation workmanship if they conform to the requirement.
  • Assigns manpower to operation based on required headcount and machine loading.
  • Supervises Mould setting for new Job orders.
  • Prepares turnover report during change of work shift.
  • Coordinates with Quality Assurance Department in conducting sampling and testing.
  • Maintains good housekeeping in the area of responsibility.
  • Prepares production manpower schedule in coordination to weekly planned schedule.
  • Rates department personnel in performance evaluation.
  • Requests and coordinates with HRD regarding additional manpower requirement.

Please email: career_portal@qcstyro.com / hr12recruit@qcstyro.com
or call contact #: 0939-643-5370 / 0945-977-9477

 

 

LINE MAINTENANCE – ELECTRICAL – VALENZUELA

No. Of Vacancy: 1

Location : Lawang, Bato

Qualifications:

  • Technical / Vocational/ Trade School Graduate, Bachelor’s degree of any course.
  • Position requires of two years experience in manufacturing.
  • Minimum one (1) to three (3) years of working experience in manufacturing industry with emphasis on electronic/ electromechanical knowledge.
  • Technical and analytical skills.

Duties and Responsibilities:

  • Conducts machine inspection and repair as per job order by Machine operators.
  • Rewiring of control panels.
  • Assists machine operators in operating machine after repair.
  • Maintains good housekeeping in area of responsibilities.
  • Trouble Shooting of Machine breakdowns.
  • Performs assigned tasks from time to time.

Please email: career_portal@qcstyro.com / hr12recruit@qcstyro.com
or call contact #: 0939-643-5370 / 0945-977-9477

 

 

REGIONAL SALES MANAGER – NORTH LUZON

No. Of Vacancy: 1

Location: North Luzon

Qualifications: 

  • Bachelor’s Degree in Business, Marketing, Finance or any related field.
  • Minimum two (2) to three (3) years of proven working experience as Regional Sales Manager or Sales Supervisor preferably from FMCG or any related sales and marketing field.
  • Has an excellent computer, analytical, communication and people management skill.
  • Expert in negotiation and building business relationships.
  • Results Driven and good sales planning skills.
  • Excellent attention to details.
  • Ability to read and analyze sales reports and market analysis.
  • Preferably residing within Central Luzon area (Bulacan, Pampanga, Nueva Ecija, La Union).

Duties and Responsibilities:

  • Identifies business opportunities by identifying prospects and evaluating their capacity to sell; researching and analyzing sales options.
  • Maintains good business relationships with clients by providing support and immediate feedback regarding our products and services.
  • Identifies product improvements or new products by remaining current on industry trends, market activities, and competitors.
  • Prepares reports by collecting, analyzing, and summarizing information.
  • Proper coordination with our Sales Coordinator regarding customer orders and ensure on-time delivery of our products.
  • Proper coordination with our Credit and Collection Department for on-time payment collection and remittance.
  • Ensure compliance with company’s policies and operational guidelines.

Please email: career_portal@qcstyro.com / hr12recruit@qcstyro.com
or call contact #: 0939-643-5370 / 0945-977-9477

 

 

PLANT IE (INDUSTRIAL ENGINEER) – GUYONG

No. Of Vacancy: 1

Location: Guyong Sta Maria

Qualifications: 

  • Graduate of Industrial Engineering.
  • With minimum of 2 to 5 years working experience.
  • Highly assertive and can work well in tight timelines and can relate in all levels in the organization.
  • With strong analytical skills and drive coupled with people management skills to demand and ensure production compliance to standard and correct planning.
  • Willing to work in Sta. Maria Bulacan City.

Duties and Responsibilities:

  • Maintains and evaluates manufacturing manpower standard requirements.
  • Assist in production planning through manpower allocation.
  • Maintains and analyzes production standard and capacity.
  • Provides assistance to the Manufacturing Director and Plant Manager on new projects.
  • Conducts monthly review of time and motion study analysis of production task related activities.
  • Maintains, evaluates, analyzes, and documents manufacturing systems and operations procedures.
  • Analyzes and maintains yearly manufacturing operation review.
  • Review and analyzes weekly production efficiency report.
  • Review and analyzes weekly manpower production status.
  • Provides assistance on manpower review board. 

Please email: career_portal@qcstyro.com / hr12recruit@qcstyro.com
or call contact #: 0939-643-5370 / 0945-977-9477

IE SUPERVISORS

No. Of Vacancy: 1

Location: Lawang,  Bato

Qualifications: 

  • Candidate must possess at least Bachelor's/College Degree in Engineering (Industrial) or any Business-related course.
  • Minimum of three 3 years to five (5) years of working experience in Manufacturing Industry related to Motion Study, Report Analysis and Industrial Engineering tasks.
  • Computer Literate.
  • Advanced knowledge in MS Office Applications.
  • Knowledge of production processes, costs, quality control, raw materials and other methods for maximizing the efficient manufacture and distribution of goods.
  • Knowledge of the ways various systems interact and how changes in operations, the environment and other conditions will affect outcomes.

Duties and Responsibilities:

  • Maintains and evaluates manufacturing manpower standard requirements. Reviews and analyzes manpower production status.
  • Assist in production planning through manpower allocation.
  • Maintains and analyzes production standard and capacity.
  • Provides assistance to the Plant Manager on new projects and reports.
  • Reviews and analyzes production efficiency and rejection report.
  • Review production schedules, process flows, and other information to understand methods and activities in manufacturing and services.
  • Designs control systems to coordinate activities and production planning to ensure that products meet quality standards.
  • Develop management control systems to make financial planning and cost analysis more efficient.

Please email: career_portal@qcstyro.com / hr12recruit@qcstyro.com
or call contact #: 0939-643-5370 / 0945-977-9477

 

 

RECYCLING IN-CHARGE/ FOREMAN

No. Of Vacancy: 1

Location: Lawang Bato, Valenzuela City

Qualifications:

  • Candidate must possess at least a Bachelor’s Degree Graduate of Engineering or any 4-Year course.
  • At least 2 to 3 year(s) of working experience in Manufacturing Industry.
  • Applicants must be willing to work in Valenzuela City.
  • With knowledge in manufacturing set up.
  • Must have people management skills.

Duties and Responsibilities:

  • Supervise the overall Recycling Operations and ensure that all recoverable materials are being process according to proper implementation from receiving, segregation, weighing, grinding, labeling, packing including inter-warehouse transfer.
  • Handles warehouse process and procedures.
  • Preparation and documentation of files as needed.

Please email: career_portal@qcstyro.com / hr12recruit@qcstyro.com
or call contact #: 0939-643-5370 / 0945-977-9477

 

 

LINE MAINTENANCE - ME & EE

No. Of Vacancy: 1

Location: Guyong Sta Maria

Qualifications:

  • Must possess at least Bachelor's/College Degree, Engineering / Vocational course (Mechatronic/Electromechanical) or equivalent.
  • At least 2 to 4 year(s) of working experience in the maintenance/repair (line maintenance and facilities) is required for this position.
  • With electro-mechanical knowledge and skills.
  • Applicants must be willing to work in Sta. Maria,Bulacan or in Valenzuela City in shifting schedules.

Duties and Responsibilities:

  • Will provide technical assistance to the Maintenance Leadmen and Foremen in terms of machinery maintenance (production engineering- line maintenance) and facility engineering (building maintenance).
  • Technical aspects of the responsibilities includes but is not limited to: operation at times or testing machinery or equipments to diagnose machine malfunctions, repairing electro- mechanical equipment, installation, aligning and balancing of new equipments, pipe fitting; boiler making, insulation, welding, machining, carpentry and repairing buildings, floors or stairs.
  • Clean or lubricate shafts, bearings, gears and other parts of machinery, repair or replace defective equipment parts, using hand tools and power tools and re- assemble equipment.
  • Maintain and perform routine preventive maintenance to ensure that machines continue to run smoothly, building systems operate efficiently, or the physical condition of buildings does not deteriorate.
  • Knowledgeable on the principles of PLC and hydraulics and has working knowledge to apply the same.

Please email: career_portal@qcstyro.com / hr12recruit@qcstyro.com
or call contact #: 0939-643-5370 / 0945-977-9477

 

MAINTENANCE LEADMAN

No. Of Vacancy: 1

Location: Lawang, Bato

Qualifications: 

  • Graduate of engineering preferably Electro- mechanical engineering, mechanical and/or mechanical or electrical engineering.
  • With at least 3 years of working experience in machinery maintenance, at least 3 years of which is in the capacity of team leader preferably in an ISO certified company.
  • Required skills: electro- mechanical skills in the technologies of production/process refrigeration, HVAC hydraulics and pneumatics) and computerized maintenance management systems.
  • Knowledge of occupational hazards safety regulations and sanitation standards.
  • Ability to diagnose are resolve programming and automation issue.
  • Knowledge of pneumatic, Hydraulic and electrical systems.
  • Working knowledge of TPM, Lean Manufacturing and/or 6 sigma principles and concepts is an advantage.
  • Ability to train and develop maintenance personnel in Electrical, electronic and automation principles and concepts.
  • With strong people management skills to ensure that production down time will be lessen due to machine break down.

Duties and Responsibilities:

  • Provide management and technical assistance to the Maintenance Supervisor in being responsible for maintenance including predictive maintenance, equipment repair and rebuild, electrical, electronics, PLC programming and troubleshooting, equipment noise control and maintenance training programs, buildings and facilities, utility infrastructure, including construction, repair wastewater systems, water distribution systems, treatment plants.
  • Supervises line maintenance activities including predictive and preventive maintenance floor maintenance diagnosis and repair and emergency maintenance.
  • Administers the predictive and preventive maintenance program.
  • Plans routine maintenance schedules and follows up on problems to develop solutions.

Please email: career_portal@qcstyro.com / hr12recruit@qcstyro.com
or call contact #: 0939-643-5370 / 0945-977-9477

 

 

ENERGY SUPERVISOR

No. Of Vacancy: 1

Location: Guyong, Sta Maria

Qualifications: 

  • Bachelor’s Degree Graduate of Mechanical Engineer.
  • Preferably Licensed Mechanical Engineer.
  • Minimum five (5) to ten (10) years of working experience in Boiler Operations.
  • Minimum two (2) to three (3) years experience in Supervisory Position.
  • Knowledgeable in all Boiler Operation, Auxiliary, Water Treatment and Pollution Control.
  • Good Leadership Skill.
  • Handles Pressure professionally.
  • Good oral and written communication.

Duties and Responsibilities:

  • In-charge of Continuous operation of boilers in compliance with production plan and plant operation plan, with coordination with boiler maintenance.
  • In-charge of Boilers assessment in terms of:
    • Safety of Manpower and Plant.
    • Boiler Efficiency.
    • Environment Compliance.
    • Cost efficiency.
    • Schedule Compliance.
  • Consolidates and analyzes reports of Boilers Operation summary (daily ; weekly ; monthly ; quarterly and yearly) (Boiler steam generation vs. plan, fuel consumption vs. plan, water consumption vs. plan, boiler chemicals compliance , parts and auxiliary status , target improvement)
  • Consolidates and analyzes report for Fuel consumption.
  • Consolidates and analyzes reports for Boiler Status to coordinate to Boiler Maintenance.
  • Consolidates reports for Boiler Improvement for Operation and procedure.
  • Checks and approve boilers plan according to production plan.
  • Oversees operation of Boilers.

Please email: career_portal@qcstyro.com / hr12recruit@qcstyro.com
or call contact #: 0939-643-5370 / 0945-977-9477

 

 

INVENTORY ANALYST

No. Of Vacancy: 1

Location: Sta Clara, Sta Maria

Qualifications: 

  • Bachelor's Degree or any 4 Years Course.
  • With minimum of 3 Years Experience Experienced in Warehousing & Domestic Shipments.
  • Knowledge in Microsoft Office.

Duties and Responsibilities:

  • Monitors stocks inventories and coordinate with sale (analyze ABC Categories and recommend actions).
  • In-charge of monitoring & shipment of Branch's Sales Order and Products for TIL (Total Inventory Level)
  • Communicate with 3rd Party Forwarders / Shipping Lines.
  • Monitors branch activities related to warehousing and deliver.

Please email: career_portal@qcstyro.com / hr12recruit@qcstyro.com
or call contact #: 0939-643-5370 / 0945-977-9477

 

 

PLANT IE HEAD

No. Of Vacancy: 1

Location: Guyong Sta Maria

Qualifications: 

  • Candidate must possess at least Bachelor's/College Degree in Engineering (Industrial) or any Business-related course.
  • Minimum of three 3 years to five (5) years of working experience in Manufacturing Industry related to Motion Study, Report Analysis and Industrial Engineering tasks
  • Computer Literate.
  • Advanced knowledge in MS Office Applications.
  • Knowledge of production processes, costs, quality control, raw materials and other methods for maximizing the efficient manufacture and distribution of goods.
  • Knowledge of the ways various systems interact and how changes in operations, the environment and other conditions will affect outcomes.

Duties and Responsibilities:

  • Maintains and evaluates manufacturing manpower standard requirements. Reviews and analyzes manpower production status.
  • Assist in production planning through manpower allocation.
  • Maintains and analyzes production standard and capacity.
  • Provides assistance to the Plant Manager on new projects and reports.
  • Reviews and analyzes production efficiency and rejection report.
  • Review production schedules, process flows, and other information to understand methods and activities in manufacturing and services.
  • Designs control systems to coordinate activities and production planning to ensure that products meet quality standards.
  • Develop management control systems to make financial planning and cost analysis more efficient. 

Please email: career_portal@qcstyro.com / hr12recruit@qcstyro.com
or call contact #: 0939-643-5370 / 0945-977-9477

 

 

DRAFTSMAN

No. Of Vacancy: 1

Location: Quezon City

Qualifications: 

  • Bachelor’s Degree Graduate in Engineering, Architecture or degree from a Technical College.
  • Minimum three (3) to five (5) years of working experience as Drafter or similar role.
  • Hands-on experience with computer-aided design (CAD) software.
  • Familiarity with 3D modeling tools.
  • Ability to meet deadlines.

Duties and Responsibilities:

  • Create technical drawings based on given specifications and calculations. Gathering drawings and specifications, calculating material and equipment requirements and setting up production methods.
  • Describe production methods step-by-step (including equipment and software types to be used).
  • Create detailed designs with computer-aided design (CAD) software.
  • Design diagrams, maps and layouts to illustrate workflow.
  • Create manuals that describe existing products’ operation, features and maintenance.

Please email: career_portal@qcstyro.com / hr12recruit@qcstyro.com
or call contact #: 0939-643-5370 / 0945-977-9477

 

 

TRAINING SPECIALIST

No. Of Vacancy: 1

Location: Lawang Bato

Qualifications: 

  • Bachelor’s Degree Graduate of any course.
  • Minimum two (2) to three (3) years of working experience in Manufacturing Industry or any Training- related job.
  • Computer literacy and keyboard skills.
  • Effective communication skills.
  • Formal training qualification is desirable.
  • Good knowledge of the application software, additional modules and development software.

Duties and Responsibilities:

  • Assists HRAD Manager in formulating Annual Training Plan that includes:
    • Training needs survey
    • Training proposal from outsourced consultants
    • Training objectives and topics
    • List of possible participants
    • Venue (if necessary)
    • Training budget
    • Assists HRAD Manager in preparing and implementing for E-Learning programs, that includes:
      • Script preparation
      • Photo Shoots
      • Story board creation
    • Actual video-based learning modules.
    • Implement the Training Plan and make necessary evaluation produces to ensure effectiveness of the conducted programs.
    • Echo in-house trainings to direct hired employees.
    • Provide high quality professional training courses and materials.
    • Ensure that all members of staff, new and existing, within the department and external to, are trained on the application to an appropriate level.

Please email: career_portal@qcstyro.com / hr12recruit@qcstyro.com
or call contact #: 0939-643-5370 / 0945-977-9477

 

 

GRAPHIC ARTIST

No. Of Vacancy: 1

Location: Quezon City

Qualifications: 

  • Bachelor’s Degree Graduate in Graphic Design, Advertising, or any Visual Arts course.
  • Minimum two (2) to three (3) years of working experience as Graphic Artist.
  • With Graphic Design and Layout Skills.
  • Customer Focus and has attention to details.
  • Creative and Flexible.
  • Deadline conscious.
  • Familiar with Desktop Publishing Tools.
  • Knowledgeable in design software, such as Quark Xpress, InDesign or Illustrator plus photo-editing software, such as Photoshop.

Duties and Responsibilities:

  • Prepares work to be accomplished by gathering information and materials.
  • Plans concept by studying information and materials.
  • Illustrates concept by designing rough layout of art and copy regarding arrangement, size, type size and style, and related aesthetic concepts.
  • Obtains approval of concept by submitting rough layout for approval.
  • Prepares finished copy and art by operating typesetting, printing, and similar equipment; purchasing from vendors.
  • Prepares final layout by marking and pasting up finished copy and arts.

Please email: career_portal@qcstyro.com / hr12recruit@qcstyro.com

or call contact #: 0939-643-5370 / 0945-977-9477

 

 

 

 

SENIOR INDUSTRIAL ENGINEER - BULACAN

No. Of Vacancy: 1

Location: Guyong Sta Maria

Qualifications: 

  • Bachelor's Degree preferably Engineering or any Business-related course.
  • Minimum two (2) or three (3) years of working experience in Manufacturing Industry related to Motion Study, Report Analysis and Industrial Engineering tasks.
  • Computer Literate.
  • Advanced knowledge in MS Office Applications.
  • Knowledge of production processes, costs, quality control, raw materials and other methods for maximizing the efficient manufacture and distribution of goods.
  • Knowledge of the ways various systems interact and how changes in operations, the environment and other conditions will affect outcomes.

Duties and Responsibilities:

  • Maintains and evaluates manufacturing manpower standard requirements.
  • Assist in production planning through manpower allocation.
  • Maintains and analyzes production standard and capacity.
  • Provides assistance to the Plant Manager on new projects and reports.
  • Conducts monthly review of time and motion study analysis of production task related activities.
  • Reviews and analyzes production efficiency and rejection report.
  • Prepare production reports.
  • Reviews and analyzes manpower production status.
  • Conducts performance evaluation of personnel under IE Department.
  • Review production schedules, process flows, and other information to understand methods and activities in manufacturing and services.
  • Designs control systems to coordinate activities and production planning to ensure that products meet quality standards.
  • Develop management control systems to make financial planning and cost analysis more efficient.

Please email: career_portal@qcstyro.com / hr12recruit@qcstyro.com
or call contact #: 0939-643-5370 / 0945-977-9477

 

 

REGIONAL SALES MANAGER – GMA – INSTITUTIONAL

No. Of Vacancy: 1

Location: GMA- Institutional 

Qualifications: 

  • Bachelor's Degree in Business Marketing, Finance or any related field.
  • Minimum two (2) to three (3) years of proven working experience as Regional Sales Manager or Sales Supervisor preferably from FMCG or any related sales and marketing field.
  • Has an excellent computer, analytical, communication and people management skills.
  • Expert in negotiation and building business relationships.
  • Results Driven and good sales planning skills.
  • Excellent attention to details.
  • Ability to read and analyze sales reports and market analysis.
  • Preferably residing within GMA area.

Duties and Responsibilities:

  • Identifies business opportunities by identifying prospects and evaluating their capacity to sell; researching and analyzing sales options.
  • Maintains good business relationships with clients by providing support and immediate feedback regarding our products and services.
  • Identifies product improvements or new products by remaining current on industry trends, market activities, and competitors.
  • Prepares reports by collecting, analyzing, and summarizing information.
  • Proper coordination with our Sales Coordinator regarding customer orders and ensure on-time delivery of our products.
  • Proper coordination with our Credit and Collection Department for on-time payment collection and remittance.
  • Ensure compliance with company’s policies and operational guidelines.
  • Deal with problems by providing creative and practical solutions.
  • Evaluate performance using key metrics and address issues to improve it.
  • Report to immediate head on progress and issues.
  • Ensure achievement of sales target; monthly, quarterly and annual.

Please email: career_portal@qcstyro.com / hr12recruit@qcstyro.com

or call contact #: 0939-643-5370 / 0945-977-9477

 

JUNIOR INDUSTRIAL ENGINEER - GUYONG

No. Of Vacancy: 2

Location: Guyong Sta Maria

Qualifications: 

  • Graduate of Industrial Engineering.
  • With minimum of 2 to 5 years working experience.
  • Highly assertive and can work well in tight timelines and can relate in all levels in the organization.
  • With strong analytical skills and drive coupled with people management skills to demand and ensure production compliance to standard and correct planning.
  • Willing to work in Sta. Maria Bulacan.

Duties and Responsibilities:

  • Maintains and evaluates manufacturing manpower standard requirements.
  • Assist in production planning through manpower allocation.
  • Maintains and analyzes production standard and capacity.
  • Provides assistance to the Operations Manager and Plant Manager on new projects.
  • Conducts monthly review of time and motion study analysis of production task related activities.
  • Maintains, evaluates, analyzes, and documents manufacturing systems and operations procedures.
  • Analyzes and maintains yearly manufacturing operation review.
  • Review and analyzes weekly production efficiency report.
  • Review and analyzes weekly manpower production status.
  • Provides assistance on manpower review board.

Please email: career_portal@qcstyro.com / hr12recruit@qcstyro.com
or call contact #: 0939-643-5370 / 0945-977-9477

 

 

RECYCLING FOREMAN

No. Of Vacancy: 1

Location: Lawang Bato, Valenzuela City

Qualifications: 

  • Candidate must possess at least a Bachelor’s Degree Graduate of Engineering or any 4-Year course.
  • At least 2 to 3 year(s) of working experience in Manufacturing Industry.
  • Applicants must be willing to work in Valenzuela City.
  • With knowledge in manufacturing set up.
  • Must have people management skills.
  • Full-Time position(s) available.

Duties and Responsibilities:

  • Supervise the overall Recycling Operations and ensure that all recoverable materials are being process according to proper implementation from receiving, segregation, weighing, grinding, labeling, packing including inter-warehouse transfer.
  • Handles warehouse process and procedures.
  • Preparation and documentation of files as needed.
  • Adheres to policies and procedures.
  • Other tasks may be assigned.

Please email: career_portal@qcstyro.com / hr12recruit@qcstyro.com
or call contact #: 0939-643-5370 / 0945-977-9477

 

 

COST ACCOUNTING SPECIALIST

No. Of Vacancy: 2

Location: Quezon City , Muñoz

Qualifications: 

  • Candidate must be Bachelors/College Degree preferably Industrial Engineering.
  • At least 1 year to 4 years working experience.

Duties and Responsibilities:

  • Ensure accuracy of product cost.
  • Reconciliation of material purchases to ensure actual cost of item.
  • To assure completeness and closing of inventories for moving average of unit cost per materials.
  • To make sure that conversion cost (labor and overhead) for the month are properly recorded.
  • Ensure updating of General Information of the product standards.
  • Completeness and accuracy of production output are closely monitored.
  • Ensure completeness/ physical existence of inventories; also, the Warehouse Transfer.
  • Willing to work on site at Munoz Quezon City.
  • Willing to do field works

Please email: career_portal@qcstyro.com / hr12recruit@qcstyro.com
or call contact #: 0939-643-5370 / 0945-977-9477

 

 

LINE MAINTENANCE- MECHANICAL – VALENZUELA

No. Of Vacancy: 2

Location: Lawang Bato, Valenzuela City

Qualifications:

  • Must possess at least Bachelor's/College Degree, Engineering / Vocational course (Mechatronic/Electromechanical) or equivalent.
  • At least 2 to 4 year(s) of working experience in the maintenance/repair (line maintenance and facilities) is required for this position.
  • With proficient knowledge in line maintenance, PLC, hydraulics.
  • With electro-mechanical knowledge and skills.
  • With auto- cad knowledge is an advantage.

Duties and Responsibilities:

  • Will provide technical assistance to the Maintenance Leadmen and Foremen in terms of machinery maintenance (production engineering- line maintenance) and facility engineering (building maintenance).
  • Technical aspects of the responsibilities includes but is not limited to: operation at times or testing machinery or equipments to diagnose machine malfunctions, repairing electro- mechanical equipment, installation, aligning and balancing of new equipments, pipe fitting; boiler making, insulation, welding, machining, carpentry and repairing buildings, floors or stairs.
  • Clean or lubricate shafts, bearings, gears and other parts of machinery, repair or replace defective equipment parts, using hand tools and power tools and re- assemble equipment.
  • Maintain and perform routine preventive maintenance to ensure that machines continue to run smoothly, building systems operate efficiently, or the physical condition of buildings does not deteriorate.
  • Knowledgeable on the principles of PLC and hydraulics and has working knowledge to apply the same.

Please email: career_portal@qcstyro.com / hr12recruit@qcstyro.com
or call contact #: 0939-643-5370 / 0945-977-9477

 

 

TALENT ACQUISITION OFFICER

No. Of Vacancy: 1

Location: Quezon City, Muñoz

Qualifications:

  • Bachelor’s Degree Graduate in Industrial Psychology or any related course.
  • Minimum (5) years of working experience as Talent Acquisition Officer in Manufacturing Industry.
  • Phone Skills, Recruiting, Interviewing and People Skills,
  • Supports Diversity, Employment Law
  • Results Driven
  • Professionalism
  • Project Management
  • Good Judgment
  • Handle Recruitment Process, Job Hiring & Other Manpower Sourcing
  • Prepare Monthly Recruitment Report
  • Conduct Jo Caravan (If Applicable)

Duties and Responsibilities:

  • Implements sourcing strategies to tap the most number of qualified candidates per vacancy.
  • Conducts IQ test to all job applicants and coordinate result of the test. Coordinate with agencies the test result of all endorsed applicants.
  • Coordinate with agencies the vacant position in all department or company.
  • Establish, maintain, update and enrich talent databank through continuous networking and sourcing.
  • Process enrollment and encoding of newly hired employees (direct) before cut-off for payroll.
  • Prepares and submit daily and monthly manpower updates and report indicating latest hiring, separation, and recruitment efficiency and hiring update.
  • Files documents in the employee 201 files such as excused letter, certificates, medical certificate for references.

Please email: career_portal@qcstyro.com / hr12recruit@qcstyro.com
or call contact #: 0939-643-5370 / 0945-977-9477

 

 

PRODUCTION SUPERVISOR

No. Of Vacancy: 1

Location: Guyong Sta. Maria, Bulacan

Qualifications: 

  • Bachelor's Degree.
  • Minimum of 5 years experience in similar position in Food Packaging Manufacturing.
  • Knowledgeable in planning, organizing, directing and control of production activities to improve the performance.
  • Possesses Analytical Thinking Skills.
  • Excellent written and oral communication skills, including reports and presentation.
  • With experience in ISO Standards company is a plus factor.
  • Can handle and supervise 400-500 employees.
  • Can work under pressure.

Duties and Responsibilities:

  • Conducts daily performance review meeting to show Actual attainment vs Standards.
  • Conducts daily machine running compliance monitoring vs plan schedule.
  • Conducts weekly performance review meeting with the Production Foreman.
  • Prepares weekly management report and submit to the Plant Manager.
  • Collaborates with other section heads related to Departmental concerns.
  • Monitoring of effective Implementation of System Compliance.
  • Monitoring and control of production related downtime.
  • Manage and control processes effective implementation in the production floor.
  • Monitoring and updates of standard cycle time compliance and provide action plan on how to hit the targets.

Please email: career_portal@qcstyro.com / hr12recruit@qcstyro.com
or call contact #: 0939-643-5370 / 0945-977-9477

 

 

AUDIT STAFF

No. Of Vacancy: 2

Location: Quezon City, Muñoz

Qualifications: 

  • Bachelor’s Degree Graduate in BSC Major in Internal Auditing or in Accounting.
  • Minimum one (1) year of working experience in the same field.
    • Assertive.
    • Analytical.
    • Keen to details.
    • Team Player.
  • Good Verbal and Written Communications Skills.
  • Computer Literate.

Duties and Responsibilities:

  • Conducts provincial and plant audit.
  • Checks payroll including preparation. Detects discrepancies to payroll summary VS DTR (Timekeeping System).
  • Checks weekly warehouse expenses completeness, validity and compliance with approved budget.
  • Checks collection reports for GMA and Provincial areas, and Aging of Receivables.
  • Checks, monitors and reconciles inventories of provincial branch VS HO record.
  • Checks the completeness series of used booklets – Sales Invoice, Delivery Receipt, Provisional Receipt, and Collection Receipt.
  • Checks Machine Shop Weekly Compliance- Rotation.
  • Scrap and Casting monitoring and audits.
  • Monitors records of all Newly Purchased and Fabricated Mould.

Please email: career_portal@qcstyro.com / hr12recruit@qcstyro.com
or call contact #: 0939-643-5370 / 0945-977-9477

 

 

PRODUCTION FOREMAN / SECTION SUPERVISOR

No. Of Vacancy: 3

Location: Guyong Sta Maria

Qualifications: 

  • Candidate must possess at least a Bachelor's/College Degree , Engineering (Electrical/Electronic), Engineering (Industrial), Engineering (Mechanical) or equivalent.
  • At least 3 year(s) of working experience in the related field is required for this position.
  • With at least 2-3 years progressive experience in all facets of Production with direct product responsibility.
  • Adept in handling people.
  • Familiar in ISO documentation & implementation.

Duties and Responsibilities:

  • Responsible to monitor assigned section to produce right quantity of quality finished products on schedule time.
  • Supervise and monitors Activities in production area.
  • Assigns and allocates Machine operators to operation based on required manpower and machine loading.
  • Inspect operation workmanship if they conform with the requirements.
  • Ensure Availability of materials and supplies of each work shift during operations.
  • Coordinates with QA department in conducting testing and sampling.
  • Coordinates with maintenance to ensure machines are in good working condition.

Please email: career_portal@qcstyro.com / hr12recruit@qcstyro.com
or call contact #: 0939-643-5370 / 0945-977-9477

 

 

CENTRAL MAINTENANCE - MECHANICAL / ELECTRICAL

No. Of Vacancy: 1

Location: Guyong Sta. Maria, Bulacan

Qualifications: 

  • Candidate must possess a Bachelor’s degree of Mechanical/ Electrical Engineering course.
  • Required Skill(s): Knowledge in handling manpower, repair and troubleshooting technical problems.
  • Minimum one (1) to three (3) years of working experience in manufacturing industry.
  • Technical and analytical skills.

Duties and Responsibilities:

  • Responsible for leading (in technical works) and handling maintenance personnel in the field connected in Plant Operations.
  • Conducts machine inspection and repair as per job order by Machine operators.
  • Assists machine operators in operating machine after repair.
  • Performs assigned tasks from time to time.

Please email: career_portal@qcstyro.com / hr12recruit@qcstyro.com
or call contact #: 0939-643-5370 / 0945-977-9477

 

 

HR/ RECRUITMENT ASSISTANT

No. Of Vacancy: 1

Location: Quezon City , Muñoz

Qualifications: 

  • Bachelor’s Degree Graduate in Psychology, Human Resource Management or any related course.
  • Minimum (2) years of working experience as Recruitment Officer in Manufacturing Industry.
  • Can prepare Monthly Recruitment Report.
  • Conduct Jo Caravan (If Applicable).

Duties and Responsibilities:

  • Implements sourcing strategies to tap the most number of qualified candidates per vacancy.
  • Conducts IQ test to all job applicants and coordinate result of the test. Coordinate with agencies the test result of all endorsed applicants.
  • Coordinate with agencies the vacant position in all department or company.
  • Establish, maintain, update and enrich talent databank through continuous networking and sourcing.
  • Process enrolment and encoding of newly hired employees (direct) before cut-off for payroll.
  • Prepares and submit daily and monthly manpower updates and report indicating latest hiring, separation, and recruitment efficiency and hiring update.
  • Files documents in the employee 201 files such as excused letter, certificates, medical certificate for references.

Please email: career_portal@qcstyro.com / hr12recruit@qcstyro.com
or call contact #: 0939-643-5370 / 0945-977-9477

 

 

SENIOR INDUSTRIAL ENGINEER - VALENZUELA

No. Of Vacancy: 1

Location: Lawang Bato, Valenzuela City

Qualifications: 

  • Candidate must possess a Bachelor's Degree preferably Industrial Engineering or any Business-related course.
  • Minimum three (3) or five (5) years of working experience in Manufacturing Industry related to Motion Study, Report Analysis and Industrial Engineering tasks.
  • Computer Literate.
  • Advanced knowledge in MS Office Applications
  • Knowledge of production processes, costs, quality control, raw materials and other methods for maximizing the efficient manufacture and distribution of goods.
  • Knowledge of the ways various systems interact and how changes in operations, the environment and other conditions will affect outcomes.

Duties and Responsibilities:

  • Maintains and evaluates manufacturing manpower standard requirements. Reviews and analyzes manpower production status.
  • Assist in production planning through manpower allocation.
  • Maintains and analyzes production standard and capacity.
  • Provides assistance to the Plant Manager on new projects and reports.
  • Reviews and analyzes production efficiency and rejection report.
  • Review production schedules, process flows, and other information to understand methods and activities in manufacturing and services.
  • Designs control systems to coordinate activities and production planning to ensure that products meet quality standards.
  • Develop management control systems to make financial planning and cost analysis more efficient.

Please email: career_portal@qcstyro.com / hr12recruit@qcstyro.com
or call contact #: 0939-643-5370 / 0945-977-9477

 

 

TRUCK MECHANIC/ AUTO ELECTRICIAN

No. Of Vacancy: 1

Location: Guyong, Sta Maria

Qualifications: 

  • Candidate must possess at least Vocational Diploma/Short Course Certificate,, Logistic/Transportation or equivalent.
  • At least 1 Year(s) of working experience in the related field is required for this position.
  • Required Skill(s): Driving
  • Preferably 1-4 Yrs Experienced Employee specialized in Automotive/Truck repairs and maintenance.

Duties and Responsibilities:

  • Repair defective trucks both engine/ under chassis.
  • Knowledgeable in driving light vehicle.
  • Can operate acetylene welding.
  • Perform preventive maintenance schedule.
  • Perform other task duties upheld by immediate superior.

Please email: career_portal@qcstyro.com / hr12recruit@qcstyro.com
or call contact #: 0939-643-5370 / 0945-977-9477

 

 

MAINTENANCE LEADMAN - ELECTRICAL

No. Of Vacancy: 1

Location: Guyong Sta. Maria, Bulacan

Qualifications: 

  • Candidates must possess a Bachelor’s Degree Graduate of Mechanical / Electrical Engineering.
  • Minimum two (2) to three (3) years of working experience in Manufacturing Industry.
  • Experience in Electronic/ Electromechanical knowledge.
  • Knowledge of occupational hazards safety  regulations and sanitation standards.
  • Must have basic mathematical and problem solving skills in order to generate and maintain departmental reports.
  • With strong people management skills to ensure that production down time will be lessen  due to machine break down.

Duties and Responsibilities:

  • Records and schedules technical and fabrication works.
  • Schedules manpower every Sunday for machine general overhauling
  • Monitors maintenance personnel in their respective work assignments.
  • Leads in fixing, repairing, and troubleshooting technical problems which occurred during production operation.
  • Evaluates and observes punctuality, efficiency, know-how of maintenance personnel.

Please email: career_portal@qcstyro.com / hr12recruit@qcstyro.com
or call contact #: 0939-643-5370 / 0945-977-9477

LINE MAINTENANCE - ELECTRICAL

No. Of Vacancy: 3

Location : Guyong Sta. Maria, Bulacan 

Qualifications:

  • Technical / Vocational/ Trade School Graduate, Bachelor’s degree of any course.
  • Position requires of two years experience in manufacturing.
  • Minimum one (1) to three (3) years of working experience in manufacturing industry with emphasis on electronic/ electromechanical knowledge.
  • Technical and analytical skills.

Duties and Responsibilities:

  • Conducts machine inspection and repair as per job order by Machine operators.
  • Rewiring of control panels.
  • Assists machine operators in operating machine after repair.
  • Maintains good housekeeping in area of responsibilities.
  • Trouble Shooting of Machine breakdowns.
  • Performs assigned tasks from time to time.

Please email: career_portal@qcstyro.com / hr12recruit@qcstyro.com
or call contact #: 0939-643-5370 / 0945-977-9477

 

 

LATHE AND CNC OPERATOR/ MACHINIST

No. Of Vacancy: 1

Location: Quezon City, Muñoz

Qualifications: ​

  • Vocational Diploma/Short Course Certificate.
  • 1-4 Years Experienced Employee

Duties and Responsibilities:

  • Skilled in operating lathe machines and milling machine & other machine shop equipment and tools
  • Candidate must possess at least a Vocational Diploma/ Short Course Certificate.
  • At least 1 year of working experience in the related field is required Preferably 1-4 Yrs Experienced Employee specializing lathe and milling machining.
  • Flexible and can willing to work on a shifting & extended schedule.
  • Full-Time positions available.
  • Willing to work in Muñoz Quezon City

Please email: career_portal@qcstyro.com / hr12recruit@qcstyro.com
or call contact #: 0939-643-5370 / 0945-977-9477